OPERATOR’S MANUAL JDI-5DP
OPERATOR’S MANUAL JDI-5DP
Operation:
Operation:
1. Remove the cap A and fill the tank with oil no more than the maximum level shown on the level
indicator B. (See Fig. 2)
Pressure Gauge
Handle
Safety Valve
Level Indicator
Cap
Wheels
B
A
F
E
D
C
Fig. 2
2. Replace the cap and tighten. (See Fig. 3)
3. Close air valve C. (See Fig. 3)
4. Open valve C to pressurize the tank 45 PSI (Maximum
of 80 PSI). Monitor the pressure using the pressure
gauge E. (See Fig. 3)
NOTE: A safety valve F is installed to prevent
over pressurization of the tank. The safety valve
is calibrated at 90 PSI.
5. To dispense fluids, squeeze the handle on the fluid
delivery gun G. (See Fig. 4)
B
G
A
F
E
D
C
C
A
Fig. 3
Fig. 4
