05
2
.
Installing the
Blind
1.
Fixing the
Brackets
2
A
1
PRODUCT ASSEMBLY
A.
Please ensure that the headrail is not installed less than
1.5meters from the floor.
B.
The brackets are designed for face or top fixing to the
window frame, wall, or ceiling.
C.
Attach the brackets to the headrail by inserting into the
channel on the reverse.
D.
Having decided the positioning of the blind, present it to the
desired position, making sure it is centred and level.
E.
Mark the location of each bracket with a pencil.
F.
Remove each bracket from the headrail by pressing the
locking
tab at the bottom of the bracket.
G.
Place each bracket on its location markings and mark
through
the desired screw hole positions.
H.
Use the screws provided to fix the brackets to wood. For
masonry , use appropriate fixings.
TOP
FIX
FACE
FIX
(
e
)
A
B
A. Make sure that the downward folds are facing outwards. Present the headrail
to its brackets, resting it on top of them.
(
a
)
2
1
A
A
3.
Fixing the
Safety
device
B.
Tilt the head-rail forward and back to engage with the lip of the bracket.
C.
Finally, push the swing arm clockwise until it locks in to place. Remember to hold
the blind in place firmly.
1
$
(
c
)
LOCK
UNLOCK
Lever rear
located under
rail
The safety device must be installed at the maximum distance possible from the control
mechanism to prevent looped chain becoming slack.
Place the safety device on the wall and mark the position of the screw hole.
Drill holes using a suitable drill bit.
Place device into position ensuring the chain is fully taut. Screw into position ensuring
device is fully closed. Test the chain moves freely though the device.
Children can strangle if a safety device is not installed. Always use a safety device to
keep cords or chains out of reach of children.
A
A
BB
B
D
