3. Installing the blind
A. Make sure that the downward folds are facing outwards.
Present the headrail to its brackets, resting it on top of them.
B.
Tilt the
head-rail
forward and back to engage with the lip of the bracket.
C.
Finally, push the swing arm clockwise until it locks in to place.
Remember to hold
the
blind in place firmly.
4
5
SAFETY DEVICES
This product has been supplied with break away safety clips attached to each cord on the reverse
of this blind. These components have been pre-installed and have been supplied to make this blind
safe in line with the new child safety regulations outlined in BS EN13120.
The break away safety clips that are attached to each panel and cord on the reverse of the blind
will break away from the front of the clip if any reasonable weight is placed on the cord on the
back of the blind. Our clips will break away leaving one side of the clip on the tape and the other
on the cord. They are easily re-attached if required.
(
a
)
(
c
)
LOCK
UNLOCK
Lever rear
located under
rail
4.
Fixing the safety device
The safety device must be installed
at the maximum distance possible
from the control mechanism
to
prevent looped chain becoming slack.
Place the safety device on the wall and mark the position of the screw hole.
Drill holes using a suitable drill bit.
Place device into position ensuring the chain is fully taut. Screw into position ensuring device is
fully
closed. Test the chain moves freely though the device.
Children can strangle if a safety device is not installed. Always use a safety device to keep cords or
chains out of reach of children.
5. Additional Safety device
