Daily use - Drying only
Warning! Refer to Safety
chapters.
Preparation to drying
Warning! Open the water tap.
Put the drain hose in the sink
or connect to the drain pipe.
1. Press button On/Off for some seconds to
activate the appliance
2. Load the laundry one item at a time.
3. Turn the programme dial to the drying
programme applicable for the items to dry.
The display shows a minimum time value and
the following symbols:
The drying symbol comes on.
The anti-crease symbol comes on.
The drying time symbol comes on.
When drying a big amount of
laundry, to have good drying
performances, make sure that the
laundry itself is not rolled up and
that is uniformly distributed in the
drum.
To have best performances in
drying when you wash the laundry
set a spin cycle at the maximum
speed allowed for your type of
items.
You can dry your laundry in two ways:
Automatic drying
1. Press button Time dry repeatedly until a black
line appears under one of the dryness level
symbol:
Extra dry level
Cupboard dry level
Iron dry level
The drying time symbol goes off
The display shows a time value, calculated on a
default load size. If the amount of your laundry is
more or less than the default size, the appliance
adjusts automatically the time value during the
cycle.
2. Press button Start/Pause to start the
programme. In the display:
The door locked symbol comes on.
The drying symbol starts to flash.
The symbol of the set level stays on (e.g.
Cupboard dry).
The other level symbols go off.
The display updates regularly the drying cycle
time (every minute).
You cannot set all levels for all kind
of laundry (refer to "Programmes
for automatic drying" table) .
Washer Dryer User Manual
28
