To open the door proceed as follows:
1. Press the button On/Off for some seconds to
deactivate the appliance.
2. Wait for some minutes and then open carefully
the appliance door.
3. Close the appliance door.
4. Activate the appliance and set the programme
again.
Opening the door when the
delay start is active
While the delay start operates, the appliance
door is locked.
To open the appliance door:
1. Press button Start/Pause.
In the display the door lock indicator
goes
off.
2. Open the appliance door.
3. Close the door and press button Start/Pause.
The delay start continues.
End of cycle
When the programme has finished, the
appliance stops automatically. The acoustic
signal operates (if it is active).
In the display comes on and the door locked
indicator
goes off.
The indicator of Start/Pause button goes off.
1. Press button On/Off to deactivate the
appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the appliance
again, the display show the end of
the last set programme. Turn the
programme knob to set a new
cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty.
4. Keep the door ajar, to prevent mildew and
odours
5. Close the water tap.
Draining water out after end
of cycle
The washing programme is completed,
but there is water in the drum
:
The drum turns regularly to prevent the creases
in the laundry.
The door lock indicator
is on. The door
stays locked.
You must drain the water to open the door:
1. If necessary, decrease the spin speed.
2. Press the Start/Pause button.
The appliance drains the water and spins.
3. When the programme is completed and the
door lock indicator
goes off, you can open
the door .
4. Press On/Off some seconds to deactivate the
appliance.
The appliance drains and spins
automatically after
approximately18 hours.
AUTO Stand-by option
The AUTO Stand-by option automatically
deactivates the appliance to decrease the energy
consumption when:
• You do not use the appliance for 5 minutes
before you press Start/Pause button.
Press the button On/Off to activate the
appliance again.
• After 5 minutes from the end of the washing
programme
Press the button On/Off to activate the
appliance again.
The display shows the end of the last set
programme.
Turn the programme knob to set a new cycle.
Washer Dryer User Manual
27
