5. Unscrew hinge
A
from the loading door,
rotate through 180°, re-insert on the
opposite side and screw down.
6. Re-insert cover plates
B
on the opposite
site having first rotated them through
180°.
7.
D
D
E
E
F
F
Unscrew cover plates
D
from the front
of the machine, rotate through 180°,
screw on the opposite side.
8. Unscrew door lock
E
, push down slightly
and remove from the front of the
machine.
9. Press snap-in button
F
in and down, press
cover down slightly and remove from
front of the machine.
10. Change door lock
E
over to the opposite
side, screw down the door interlock.
11. On the other side, insert cover
F
and
allow snap-in button to lock into place.
12. Insert loading door and hinges into
recesses on the front of the machine and
screw down.
Note regarding contact protection:
The machine is only secure for operations
again once all plastic parts have been inserted.
Electrical connection
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
27
