Cleaning the drum
Caution!
Do not use abrasives or
steel wool to clean the drum.
Lime in the water or cleaning agents
may form a barely visible lining on the
inside of the drum. The degree to
which the laundry has been dried is
then no longer detected reliably. The
laundry is damper than expected when
removed from the dryer.
Use a standard domestic cleaner (e.g.
vinegar-based cleaner) to wipe down
the inside of the drum and drum ribs.
Clean operating screen
and housing
Caution!
Do not use furniture
cleaners or aggressive cleaning agents
to clean the machine.
Use a damp cloth to wipe down the
operating screen and housing.
What to do if ...
Troubleshooting by
yourself
If, during operation, the error code
E...
plus
number or letter) appears on the LCD: Switch
the machine off and on again. Reset
programme. Press the START PAUSE button
If the error is still displayed, please inform your
local Service Force Centre and quote the
error code.
Problem
Possible cause
Remedy
Dryer does not work.
Mains plug is not plugged in or
fuse is not working correctly.
Plug in at mains socket. Check
fuse in fuse box (domestic
installation).
Loading door is open.
Close loading door.
Have you pressed theSTART
PAUSE button?
Press the START PAUSE button
again.
Drying results unsatisfactory.
Wrong programme selected.
Select a different programme the
next time you dry (see
“Programme chart” chapter).
Filter clogged.
Clean filter.
Overloading of laundry.
Observe recommended loading
volumes.
Ventilation slots covered up.
Uncover ventilation slots.
18
