Selecting the programme
Use the programme selector to set the
programme you require. The estimated time
to end of the programme appears in the LCD
in h:mm format (hours:minutes).
during the cycle time elapses by steps of one
minute; less than 1 hour the leading zeros are
not shown (ex. “59”, “5”, “0”);
Selecting additional
functions
You can choose from the additional functions:
6
7
1
2
3
4
5
button 1 -HALF POWER
button 2 -LONG ANTICREASE
button 3 -ALARM
button 4-TIME
button 6-DELAY START
Setting child lock
The child lock can be set to prevent a
programme being accidentally started or a
programme in operation being accidentally
changed. The child lock function locks all
buttons and the programme knob. The child
lock can be activated or deactivated by
holding down the ALARM and TIME buttons
simultaneously for 5 seconds.
– Before programme is started:
Appliance cannot be used
– After programme is started:
Programme in operation cannot be
changed
The icon appears in the display to indicate
that the child safety device is activated.
The child safety device is not deactivated once
the programme comes to an end.
If you want to set a new programme, you must
first deactivate the child safety device.
Starting the programme
Press the START PAUSE button. The
programme is started.
The programme phase is shown in display by
appropriate icons. From left to the right, from
drying ,anticrease , to cooling .
Changing programme
To change a programme which has been
selected by mistake once the programme has
started, first turn the programme selector to
OFF
position. The programme is cancelled.
15
