Duration and End can be used
at the same time, if the oven is to be
switched on and off automatically
later. In this case first set Duration
, then End .
Setting the clock
functions
1. Set an oven function and temperature
(necessary only for Duration and End).
2.
Time
functions
Push the Selection button again and
again until necessary function indicator
flashes.
3. To set the time for Minute minder ,
Duration or End , use "
+
" or "
-
"
button.
The related function indicator comes
on.
When the time period is completed, the
function indicator flashes and an
acoustic signal sounds for 2 minutes.
With the functions Duration and
End the oven stops automatically.
4. Push any button to stop the signal.
5. Turn the oven functions control knob
and the temperature control knob to off
position.
Cancelling the clock
functions
1. Push the Selection button again and
again until necessary function indicator
flashes.
2. Push and hold button "
-
".
After some seconds the clock function
goes out.
Using the accessories
Warning!
Refer to "Safety
information" chapter.
11