05
3.
Cutting down
the top and
bottom bars
NEXT STEP
4.
Reposition
the top and
bottom bar
1.
Marking the
fabric
2
2
3
3
1
1
2
1
3
Mark a line where you wish to cut the fabric.
Slot the top and bottom bar back to the correct position.
When cutting the top bar it is important
that there is a 4mm edge of the head
rail that is not covered by fabric. This
will ensure that the fabric does not rub
against the mechanism in use.
For blinds that sit within the recess.
Subtract: Top bar 28mm,
Bottom bar 32mm
Product assembly on following page
2.
Cutting the
fabric
TRIMMING THE BLIND
