04
1.
Decide on
position of
your blind
Outside recess mount
Decide on the position
of the blind so that it
overlaps on both sides
equally, at least 5cm.
Inside recess mount
You may need to trim the
recess. Recess needs to be
in the blind mechanism. Also
check how much space any
window handles etc need.
Inside window recess
Measure both the width and the length of the space to get the right dimensions.
Remember to take measurements at different points and use the smallest to ensure
accuracy. If you prefer to hang your blind in front of the recess, position it as far above
as you choose, then measure the inside of the recess crosswise and add a minimum of
0.5cm to each side.
Outside window recess
it – though we recommend leaving around 10cm above the window frame or recess.
2.
Measuring
BLIND POSITIONING
3(Product Width>150)
2(Product Width≤150)
3(Product Width>150)
2(Product Width≤150)
3(Product Width>150)
2(Product Width≤150)
