Instruction manual
John Lewis 2 Slice toaster
Care instructions
After use and before cleaning, switch off at the mains, remove
the plug from the wall socket and wait for the toaster to cool.
When the appliance has cooled down completely, lightly tap
the sides of the case to dislodge any crumbs lodged in the
toaster chamber. Push the crumb tray to release it from the
main unit. Empty the tray and replace it.
-
Wipe the outside of the toaster with a soft, damp cloth
and dry with a soft, dry cloth.
-
NEVER use metal polish or coarse scouring agents on
your toaster.
-
NEVER immerse your appliance in any sort of liquid,
including water.
-
NEVER use any pointed or sharp articles for cleaning
the inside of the toaster to avoid the risk of damaging
the heating element.
-
NEVER use a brush or put your fingers or metal
implements into the slots.
CAUTION: To prevent damage to the appliance, do not use
alkaline cleaning products. Use a soft, damp cloth and a mild
detergent.
Problem
Cause
Solution
Troubleshooting
Toasting lever will
not stay depressed
- Toaster is not
switched on at the
plug
- The browning dial
may be on too low
a setting
- Crumbs may be
obstructing the
path of the lever
- Check that the
plug is correctly
connected
- Try setting the
browning dial to a
slightly higher level
- Unplug the
toaster, lightly tap
its sides and clear
the crumb tray
Persistent burning
smell while toasting
- Toast debris and
crumbs may be
trapped in the
toaster
- Unplug the
toaster, lightly tap
its sides and empty
the crumb tray.
Clear any larger
pieces of food
debris using a
non-metal
implement
10
