JB0112-071-INS-LAB-Rev
C17
10
OPERATION
Nebulizer Operation
s
NOTICE: The Nebulizer Compressor is designed for
intermittent use only. Do not operate it continuously for
more than 20 minutes for a single use without turning it
off and allowing a cooling period of least 40 minutes.
1. Ensure that the ON/OFF switch is in the OFF position.
2. Plug the power cord into a properly grounded electrical
wall outlet.
3. Move the ON/OFF switch to the ON position to start the
compressor.
4. Place the nebulizer mouthpiece between teeth and
close mouth (or install the mask on face).
5. As aerosol starts flowing, inhale deeply and slowly
through mouthpiece (or mask).
WARNING: Never use a nebulizer with a clogged nozzle.
If the nozzle is clogged, the aerosol mist will be reduced,
altered or stopped, which will diminish or eliminate the
effectiveness of the treatment. If clogging occurs, replace
the nebulizer.
Info: If you need to interrupt treatment, move the ON/OFF
switch to the OFF position.
6. When the treatment is complete, move the ON/OFF
switch to the OFF position to turn off the compressor.
7. Unplug the compressor from power outlet.
8. Disconnect nebulizer from tubing.
9. Clean nebulizer as instructed in
MAINTENANCE/
Cleaning the Nebulizer Cup
.
WARNING: This product contains small parts that may
present a choking hazard to small children, and the tubing
may present a strangulation hazard.
Always use close
supervision when this device is used by or near children
or those who require close supervision.
