26 of 40
10.
RECOMMENDED MAINTENANCE
1.
The lift should be greased at least once every two months. There are six (6) points on each
lift that will take grease: four (4) on the scissors hinges and one on each of the two (2)
hydraulic cylinder rod eyelet’s.
2.
The fluid level in the reservoir should be checked periodically. Be sure that the lift is fully
lowered when checking. The hydraulic fluids should be changed once every five years. Use
only ISO 32 hydraulic fluid.
3.
The roller tracks should always be kept clean and free of debris. This area should be
checked before any raising or lowering of the lift.
4.
Inspect the operation of the lift daily. Raise and lower fully.
5.
Inspect electrical and mechanical operations of all switches, electrical and mechanical.
6.
Lifts equipped with full floating rear slip plates and front radius turning plates, require to be
disassembled and cleaned once every 3 months. More frequently with lifts that are in areas
with more exposure to sand and salt.
NOTE: Locking pins should always be installed on front and rear plates before attempting
to drive a vehicle on or off the lift.
Summary of Contents for 48109B
