
User’s Manual
Rembrandt 200, 300, 2000 and 3000 AGO
JOHANNUS
JOHANNUS
14
FA = Fix Accessories (Freeze accessories)
When you use the couplers and tremulants in the fixed combinations (presets) or in the free
combinations (capture system) or using the thumb piston “0" (cancel) these will change too. You
can avoid this by using the FA thumb piston. As long as this piston is switched on you can only
switch the couplers and tremulants on or off by hand.
By pushing the FA piston again its function will be switched off again.
SET
A thumb piston to program:
!
Free combinations (see under “Using free combinations”).
!
Stop combinations of the General Crescendo (see under “Using the General Crescendo”).
!
Volume-, Tune- en Transposer-adjustments (see under the description of the thumb pistons
Volume, Tune and Transposer).
!
MIDI-tabs.
1 thru 8
Thumb pistons to store a personal registration into the capture memory by giving these
registrations a number (1 thru 8) within a memory level (bank). These thumb pistons you need
again to call these stored registrations from the capture memory. See under “Using free
combinations”.
– and +
Thumb pistons with which you:
!
Choose a Memory level (bank 1 thru 8). (See under “Using free combinations/ capture
system”.)
!
Choose a step to be programmed in the General Crescendo. (See under using the General
Crescendo.)
!
Adjust the volume, tune en transposer (see under the description of the thumb pistons
Volume, Tune and Transposer).
!
Choose an expander module patch/voice number and a channel number (see under
“Programmable MIDI”).
When you keep on pushing the - or the + piston these will automatically count down or up.
GC = General Crescendo
Piston to switch the General Crescendo function on or off. See under “Using the General
crescendo”.
PGM = Program General crescendo and MIDI-tabs
Piston that enables you:
!
To change the stop combinations of the General Crescendo. See under “Using the General
crescendo”.
!
To program a MIDI-tab. See under “Programmable MIDI”.
PP thru T
The fixed combinations (presets) are registrations, preset according to musical standards,
starting with PP (Pianissimo: very soft) thru T (Tutti: full organ).
The Tutti piston has two functions. When you play a stop combination chosen by yourself or
from the presets (PP thru FF) the T piston calls the full organ; the normal function of this piston.
However, when you push the T once more you will recall the previous registration.
The presets have been fixed in the factory and cannot be changed by the user.
When you push one of the preset pistons the factory programmed stops will light up accordingly.
It is always possible to switch stops on or off by hand.