Vision
Es-Plus
//
Vending
MNP141GBV00 Date: 2011/04/29 Rev. 0 PAGE 2 OF 24
F
WARNING!
Read the following instructions carefully before using your machine:
?
Remove plastic plugs from bottom of machine
and place it on the floor before
opening and unpacking.
?
When dis carding packaging material or an old machine,
please consult about
recycling.
?
Since the machine has a cooling unit,
it should be transported in vertical position
and it should not be connected to mains until 2 hours have elapsed after concluding
the unpacking and installation process.
?
Before connecting to mains,
make sure that the power supply characteristics
coincide with those of the machine.
?
The power cable plug
should be installed so the machine can be easily
disconnected from mains.
?
Place a rubber protection
around the power cable in the slot of the lid of the cable
winding recess.
?
Do not burn or throw away the battery.
Batteries should be disposed of in
accordance with local laws and regulations and may be recyclable.
?
Protect the machine
against humidity, dust, dirt, etc. You should particularly avoid
any obstruction of the ventilation grids.
?
Do not clean the machine
with concentrated products as they may attack the
painted and wood surfaces and alter the colour.
?
Frequent cleaning,
can prevent breakdowns and extend the machine's service life.
?
The machine should be installed
in a vertical position, with a maximum back to
front or lateral tilt of 5% (~2°).
?
If you need to replace the power supply cable,
please replace it with the
appropriate one for your country:
If the power cable is damaged
, it should be replaced by the manufacturer or
after sales service or similar qualified personnel to prevent hazards.
Jofemar S.A.
Ctra. de Marcilla Km.2,
31350 PERALTA. Navarra, SPAIN.
http: //
www.jofemar.com
Tel. +34 948 75 12 12 Fax +34 948 75 04 20
