Vision
Es-Plus
//
Vending
MNP141GBV00 Date: 2011/04/29 Rev. 0 PAGE 14 OF 24
H.
Thermometer connection
Q.
(Not in use)
I.
(Not in use)
R.
Set slave number
J.
Battery connection (temperature
controller)
S.
(Not in use)
T.
Connection to master
4.4.
Relay card
RELAY CARD CONNECTORS
A.
Cooling unit enabling and lighting
B.
Control card power supply
C.
(Not in use)
D.
Transformer connection
Fig. 17
4.5.
Electronic thermometer card
The temperature of the product hold is measured with an
electronic thermometer which can be placed in different
locations of the product hold. Normally, it is located half way up
the hold.
Fig. 18
4.6.
Elevator product detector photocell cards
A. Transmitting car
B. Detecting card
Fig. 19
4.7.
Electronic control system
The electronic control system is in the lower part of the cabinet. To access it you need to
previously remove the elevator product detector checking assembly.
In the case of refrigerated machines, you also have to remove the insulated cover that
protects the control card.
A
B
