I Do not install in the following types of location, otherwise this may cause malfunction:
• Locations where the temperature can exceed -10° C or 40° C.
• Locations where the unit may come into direct contact with water.
• Locations where the unit is under direct or strong sunlight.
• Locations where there is a lot of condensation.
• Locations where corrosive, neutral, or reductive gases are present.
• Places lower than -20 m or higher than 2.000 m above sea level.
I Installation location
• Install somewhere the unit will be easy to use, as shown in the figure.
If the unit is installed too low, water may get on it when the floor is being cleaned (the bottom of
the unit must be at least 150 mm higher than the floor or any objects under it).
• The left side of the unit must be at least 150 mm away from any walls, because the power switch is
located on the left.
• Ensure there are no mirrors or walls near the right side, as drops of water may splatter to the right
when drying hands (recommended distance is at least 100 mm).
• Avoid locations where people or doors might bump into the unit.
• Choose a completely fíat surface on the wall to install the unit.
I Installation Base
• If your space is limited and the condition of wall is unsatisfactory, you can purchase an installation
base to install this unit.
Precautions before installing
Power supply
Unit
Front panel
installation screws
Power indicator
Drain tank
Air filter
Self-check indicator
Fixed screws
Installation panel
Installation heights
(Recommended)
890 mm (for man)
870 mm (for woman)
Power switch
GB