Full level
Routine Cleaning
Cleaning the Unit body
Before it gets obviously dirty
• Only use the neutral cleaning agents.
• Do not use thinner, acidic or alkaline toilet
cleaners, or nylon brush. (Otherwise, they may
damage the smoothness of surface).
Only use the alcohol to clean the hand-drying
área. (Do not use alcohol anywhere else).
• Alcohol here means the alcohol used for
disinfection (concentration below 83%).
• If the chemical cloths used, please read their
instructions first.
• Disinfecting agents will damage your unit.
Clean the unit with a soft cloth.
If the unit gets very dirty, clean with a soft cloth dampened
with neutral agent, then clean with a dry soft cloth.
Remove the dirt from the sensor, (to prevent malfunction).
Note
WARNING
• Before you clean the unit, tum off the
power switch.
• Do not splatter water on the unit.
-A<
Caution
The antibacterial coating is effective when the bacteria
exposed the coated surfaces (See the shade áreas on the
figure) The antibacterial coating becomes not effective when
the surfaces get very dirty.
Draining and Cleaning the drain tank
Before it filis up (at least once a week)
Cleaning the air filter
Around once a week
• The water blown off the hands is called "drain water".
• Empty the drain water at any moment, in order to prevent
accumulated water from exceeding the full level.
• It will start smelling if the accumulated water remains in
the tank for too long time.
Pull the drain tank out in the
horizontal direction.
This ensures the drain water
does not splatter out.
1 . Open the cover and empty
the water.
• Pull the cover up with your
fingers in the direction of
the arrow on top of the
cover, and then remove the
cover completely.
2. Wash out the interior of the
drain tank.
3. Close the water tank
cover, and Re-attach it to the
unit as original.
• Confirm the
two locations
are firmly
inserted.
Remove the air filter.
• Pull the air filter out by the handle.
1 . Cleaning the air filter.
• Beat it lightly by hand or use a
vacuum cleaner.
• If it is very dirty, wash it off with
cold or warm water.
2. Re-attach to the unit.
• Insert it all the way in, until it
stops.(If it is not in place, the dirt
or dust will enter the unit and
shorten its service life.)
Full level
Air filter
Handle
Cover
Full level
Add 200cc (around 1 cup) of water
through the drain hole. (to prevent
it from getting clogged).
• Use the unit after confirming that
the water tank is in place.
• If you wash the air filter with water,
and dry it as much as possible.
• Do not expose to the fire.
Note
GB