JOBO JOBOBIKE Bruno, Owner'S Manual

Page: 19 / 48

Rider’s Comfort
Generally, for the most comfortable riding position and the best pedaling efficiency, the seat height
should be set correctly in relation to the rider’s leg length, as described in the Adjusting the Seat
Height section, allowing the knees to be slightly bent with the ball of the foot still on the pedal
when the pedal is at the lowest point at the bottom of each stroke. Depending on a rider’s prefer-
ence, ability, and amount of experience with bikes and E-bikes, lowering the seat so the rider can
put one or both feet on the ground without dismounting from the seat. This may offer a safer and
more comfortable experience while operating the bike.
To obtain the maximum comfort, riders should not overextend their arms’ reach when riding. It is
generally advised to ensure that the handlebar and brake lever angles allow a comfortable arm po-
sition and relatively straight line from forearms, wrists, and hands. Ensure that the handlebar angle
is adjusted so that the handlebar does not contact the rider’s body while turning. A bike fitting pro-
fessional, such as a certified bike mechanic who specializes in bike fitting, should be consulted to
ensure you have a good fit.
NOTICE:
If you have any questions regarding the proper fit of your bike, please consult a certified lo-
cal bike mechanic for assistance or contact JOBOBIKE.
Adjusting the Seat Height
For most users, the seat height should be set by placing the ball of their foot on the pedal
when the pedal is at its lowest point. In this orientation, their legs should be almost fully
ex-
tended, with a slight bend at the knee. The correct seat height should not allow leg strain
from overextension and thehips should not rock from side to side when pedaling. To adjust
the seat height:
1. Open the quick release lever by swinging the lever open and outwards fully .
2. Move the seat up and down by sliding the seatpost in or out of the seat tube.Set the de-
sired seat height.
18