7
Use the charger only in a standard 110
–
120 V 60 Hz electrical outlet
.
Charge the battery only with the charger
supplied with the drill
.
Do not use the charger in wet or damp
conditions
. It is intended for indoor use
only. Do not use the charger near sinks or
tubs. Do not immerse the charger in water.
Do not allow the cord to hang over the
edge of a table or counter or touch hot
surfaces
. The charger should be placed
away from sinks and hot surfaces.
Do not use charger to charge any
batteries other than the drill batteries
.
Other batteries may explode.
Do not operate charger if cord or plug is
damaged
. Replace damaged cord and plug
immediately.
Do not operate charger if it has received
a sharp blow
, been dropped or otherwise
damaged in any way. Have a qualified
technician examine the charger and repair
it if necessary. Do not disassemble the
charger.
For best results, only charge the battery
when the temperature range of the battery
or work area is between 10
–40°C (50–
105°F).
Unplug the charger when not in use
and
before cleaning or maintenance.
Do not abuse the cord
. To reduce the risk
of damage to the electric cord or plug,
never carry the charger by the cord or yank
the cord to pull the plug. Always grasp the
plug and pull to disconnect. Always keep
the cord away from heat, oil and sharp
edges.
BATTERY & CHARGER SAFETY
NOTE:
See Pages 18 & 19 for
detailed information on exercising the
battery for peak performance and for
disposal of defective batteries.
Summary of Contents for 54-2891-8
Page 11: ...11 TOTE CONTENTS...
Page 20: ...20 PARTS DIAGRAM MODEL 54 2891 8 Cordless Drill...
