The burner shall be fed by the fuel mentioned on the data plate with the features and data shown in this Manual. The
supply line feeding the burner shall be perfectly sealed. It shall also be provided with all the control and safety devices
required from the regulations in force. Make sure that no external materials enter the line during the installation.
Make sure that the electric system is adequate for the features shown on the data plate and this Manual. The burner shall
be properly connected to a safe earthing system, in compliance with the regulation in force. In case of doubt, ask qualified
personnel to accurately inspect the installation.
Never exchange the cables of the neutral with the cables of the phase.
The burner may be connected to the electric network by a plug-socket connection, only if this is provided in such a way
that the configuration of the coupling prevents the reversal of the phase and of the neutral.
Install a service switch in the control panel for the heating unit, as required from the current regulation.
The whole electric system and all the sections of the cables shall be adequate for the maximum value of input power
shown on data plate of the unit and in this Manual.
In case the feeding cable of the burner becomes faulty, refer to qualified personnel only.
Never touch the unit with wet parts of the body and/or barefooted.
Never pull electric cables and keep them distant from heat sources.
The length of the cables shall allow the opening of the burner and of the boiler door.
The electric connections shall be affected by professionally qualified personnel only, in compliance with the regulations
in force.
Remove the packing material and make sure that the contents has suffered no damage. In case of doubt do not use the
burner and contact the supplier. The packing material ( wooden crates, paperboard, plastic bags, foamed polystyrene, etc.)
represents a form of pollution and may become a source of hazard. It shall be gathered and disposed in a proper way.
pag. 78
Summary of Contents for G50/2 oil
