Joab EcoDrive VL10U, Operation And Maintenance Manual

Page: 23 / 57

17
CBW Controller
EcoDrive skip-loaders are equipped with a
CBW controller, as shown opposite.This is
used to control the skip-loader's work lighting.
The CBW controller is normally mounted onto
the driver's A-post using a mounting bracket.
Operation
The CBW controller is activated by pressing
the OK button that is located at the bottom of
the user interface.
If there are any active warnings, the user inter-
face will display them when activated (refer
also to
"Warnings", on page 18 ).
User Interface
The areas marked with white rectangles correspond to the function buttons below them: F1–F4
and the UP/DOWN arrows. These buttons are used to activate/deactivate the corresponding
function displayed in the white rectangles above them. A green rectangle is also lit when the
function is active.
All other icons that are displayed on the screen simply provide feedback to the user regarding
the status of the lighting.
Icon Definitions
Provided below is a list of the icons that can be displayed in the user interface and their mean-
ing.
Icon Function Icon Function
Work light - ON Red light ON/OFF
Reverse lights - ON Reverse light ON/OFF
Table 3: User interface – icon description
EcoDrive VL10-VL18 manual: 1021046 Edition 2 | 2022-05-02