Jntech JNP22KH-V5 User Manual Download Page 4

Page: 4 / 98

Safety

Symbol

Meaning

Danger!

Means that it may lead to serious accident of injuries, if

safety warning is ignored.

Warning!

Means that it may lead to serious accident of injuries,
equipment serious damage or main business interruption, if
safety warning is ignored.

Notice!

Means that it may lead to moderate accident of injuries,
equipment moderate damage or part of the business
interruption, if safety warning is ignored.

Note!

Means that the content is additional information.

Inverter related symbols:

Symbol

Meaning

Direct current (DC)
Alternating current (AC)

Protective grounding

Refer to relevant instructions

Can not discard inverter together with domestic garbage

Beware of dangerous high-voltage.

Summary of Contents for JNP22KH-V5



































































































Search results

Summary of Contents for JNP22KH-V5

Reviews:

Related manuals for JNP22KH-V5

Brands by name

Popular brands

Jntech JNP22KH-V5, User Manual

Search results

Summary of Contents for JNP22KH-V5

Reviews:

Related manuals for JNP22KH-V5

Brands by name

Popular brands