JNJ SPAS SPA-319, Operating Instruction

Page: 5 / 14

Ⅳ
. The operation under standby status
1. Clock setting
1.1 When preheating and circulation cleaning are not turned on, press “ ” or “ ” to enter
the clocking setting, the “ ” is not fashing at this time, but hour and minute are fashing.
∶
1.2 Each press “ ”key to add 1 hour, when the user press “ ” key and hold it, the hour will
continuously increased. The adjustment range is 0~23.
1.3 Each press “ ”key to add 1 minute, when the user press “ ” key and hold it, the
minute will continuously increased. The adjustment range is 0~59.
1.4 The system will automatically delay 6s and then exit afer all the setting is finished.
2. The operation of circulation cleaning
The circulation cleaning could be set up once in a day. The details shown below:
OFF
OFF
Fig 6:The circulation Fig 7:The circulation Fig 8:The circulation
cleaning can’t be set up cleaning can be set up cleaning will last for 3 hrs
1) When A2=OFF, the circulation cleaning can’t be set up(Fig. 6); When A2=ON, the user could set up
the circulation cleaning, LCD is showing “ ” at this time(Fig. 7).
2) Press “ ” key to enter circulation cleaning, the “CYCLE” symbol is fashing at this time.Press “
” key could change the starting time of the circulation cleaning, the operation shown as below:
Each press “ ”key to add 1 hour, when the user press “ ” key and hold it, the hour will
continuously increased. The adjustment range is 0~23.
3) Press “ ” key to switch to set up the last time of circulation cleaning(Fig. 8), the last time is
not fashing. Each press “ ”key to add 1 hour, the range is 1-11hours.
4) Press “ ” to confirm all the settings and exit circulation cleaning set up, all the settings will
keep in memory even the system is powered off.
5