CDC160 DVD Case Wrapper
TP 000 103 - 11 -
Figure 4
Fold the remaining half of the polypropylene sheet down over the case and lightly tension the sheet
in the forward direction with finger pressure and hold in the sheet in position with thumb pressure
then trap the sheet in position with the hinged lid of the tray (figure 5). A cut-out in the lid is
provided to allow thumb pressure to be maintained until the lid is closed (figure 6).
Figure 5 Figure 6
While holding the tray lid down apply heat to the two ends of the polypropylene sheet by pushing
the heater onto the front edge of the case and holding it there for two seconds. The heater position
is controlled by pushing the black knob, directly in front of the tray, towards the tray up to a
mechanical stop. (figure 7)
