48
4.
Close the shield and press START.
5.
A “processing” message appears.
6.
Once the cycle completes, the following message appears for a moment, and then the
screen returns to the calibration menu.
Once the milling tool has been calibrated, you have to calibrate the reading clamp.
CALIBRATE READER
1.
Select the Calibrate reader icon.
2.
The display reads:
3.
Open the clear shield and fasten the calibration template (CRG) in the reading clamp
until it reaches the tip of the clamp. (Fig.38)
4.
Close the shield and press START.
5.
A “processing” message appears.
6.
Once the cycle has completed, the following message will be displayed:
7.
If it has not processed successfully, a calibration error
message will be displayed
Saving information!!!
CALIBRATE READER
Insert
calibration tool
START/STOP
Saving information !!!
CALIBRATE READER
00.10 00.12 (mm)
START/STOP
T12
T13
T14
Fig.39
T15
Summary of Contents for AVANTCODE
