JLL Sonic 1, Instruction Manual

Page: 10 / 20

10
SONIC 1 ASSEMBLY
The bike has been assembled and tested at the factory, so you shouldn’t have any
problems putting all the parts together. Components are designed to fit together, and
only basic tools are required for the assembly process. Inside the box you will find a Tools
Pack (Hex Allen Key, Multi-tool, Washers and Bolts). See previous page.
To assemble your JLL SONIC 1 please follow these easy steps:
STEP 1
Attach the front and rear stabilizers to the main
frame using 4 x flat washers and 2 x bolts (Bolt 1).
STEP 2
Slide the vertile seat post into the main frame and
secure using the spring loaded knob.
STEP 3
Fix the saddle to the seat post by placing it on top
and tightening the bolts on either side.
STEP 4
Attach the right and left handlebars to the main frame
by lifting up the drive assembly, aligning the holes to
the ball joint at the bottom of the handlebars. Insert 1
x hex bolt (Bolt 3), add 1 x spring washer and 1 x flat
washer to the other side and secure with a hex nut.