11
JF600 PRO ASSEMBLY
The bike has been assembled and tested at the factory, so you shouldn’t have any
problems putting all the parts together. Components are designed to fit together, and
only basic tools are required for the assembly process. Inside the box you will find a Tools
Pack (Hex Allen Key, Multi-Tool, Washers and Bolts). See previous page.
To assemble your JLL JF600 PRO please follow these easy steps:
STEP 1
Attach the front and rear stabilisers to the main base
using four M8 square neck bolts, four arc washers,
four spring washers and four M8 domed nuts.
Tighten using the multi-tool.
NOTE: The front stabiliser will be the shorter one
and is attached using the shorter bolts.
STEP 2
Attach the pedals to the base, each pedal will be
labeled L and R.
The right pedal must be threaded clockwise and the
left anti-clockwise.
STEP 3
First attach the saddle to the horizontal seat post
using four M8 hex socket head screws and four flat
washers.
STEP 4
Next, attach the saddle to the verticle seat post
using an adjustment knob, D10 flat washer and
square nut.
