manualshive.com logo in svg

JLG LiftPod FS60, Operation, Safety, Service And Maintenance Manual, Page: 6 / 97

Share
Download
JLG LiftPod FS60 Operation, Safety, Service And Maintenance Manual Download Page 6

FOREWORD

LIFTPOD by JLG

1001070465

c

THIS PRODUCT MUST COMPLY WITH ALL SAFETY RELATED BULLE-
TINS. CONTACT JLG OR THE LOCAL AUTHORIZED JLG REPRESENTA-
TIVE FOR INFORMATION REGARDING SAFETY RELATED BULLETINS
WHICH MAY HAVE BEEN ISSUED FOR THIS PRODUCT.  

NOTICE

JLG MUST BE NOTIFIED IMMEDIATELY IN ALL INSTANCES WHERE JLG
PRODUCTS HAVE BEEN INVOLVED IN AN ACCIDENT INVOLVING
BODILY INJURY OR DEATH OF PERSONNEL OR WHEN SUBSTANTIAL
DAMAGE HAS OCCURRED TO PERSONAL PROPERTY OR THE JLG
PRODUCT.

NOTICE

JLG INDUSTRIES INC. SENDS SAFETY RELATED BULLETINS TO THE
OWNER OF RECORDS OF THIS MACHINE. CONTACT JLG INDUSTRIES
INC. TO INSURE THAT THE OWNER RECORDS ARE UPDATED AND
ACCURATE.

For:

• Accident reporting

• Product safety publica-

tions

• Current owner updates

• Questions regarding

product safety

• Standards and regulations

compliance information

• Questions regarding spe-

cial product applications

• Questions regarding prod-

uct modifications

Go to Discount-Equipment.com 

to order your parts

Summary of Contents for LiftPod FS60


































































































Reviews:

No comments