SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121615
– JLG Lift –
6-27
13.
Fuel Filter (Propane) - GM Engine
Interval - 3 Months or 150 hours of operation
Comments - Replace filter. Refer to Section 6.6, Propane Fuel
Filter Replacement
6.4
TIRES & WHEELS
Tire Inflation
The air pressure for pneumatic tires must be equal to the air pres-
sure that is stenciled on the side of the JLG product or rim decal
for safe and proper operational characteristics.
Tire Damage
For pneumatic tires, JLG Industries, Inc. recommends that when any
cut, rip, or tear is discovered that exposes sidewall or tread area cords
in the tire, measures must be taken to remove the JLG product from
service immediately. Arrangements must be made for replacement
of the tire or tire assembly.
For polyurethane foam filled tires, JLG Industries, Inc. recommends
that when any of the following are discovered, measures must be
taken to remove the JLG product from service immediately and
arrangements must be made for replacement of the tire or tire
assembly.
• a smooth, even cut through the cord plies which exceeds 3
inches (7.5 cm) in total length
• any tears or rips (ragged edges) in the cord plies which
exceeds 1 inch (2.5 cm) in any direction
• any punctures which exceed 1 inch in diameter
Summary of Contents for 600A
