SECTION 1 - SAFETY PRECAUTIONS
1-10
– JLG Lift –
3121272
•
During operation, keep all body parts inside platform rail-
ing.
•
Always post a lookout when driving in areas where vision is
obstructed.
•
Keep non-operating personnel at least 6 ft. (1.8m) away
from machine during all operations.
•
Under all travel conditions, the operator must limit travel
speed according to conditions of ground surface, conges-
tion, visibility, slope, location of personnel, and other fac-
tors.
•
Be aware of stopping distances in all drive speeds. When
driving in high speed, switch to low speed before stopping.
Travel grades in low speed only.
•
Do not use high speed drive in restricted or close quarters
or when driving in reverse.
•
Exercise extreme caution at all times to prevent obstacles
from striking or interfering with operating controls and per-
sons in the platform.
•
Ensure that operators of other overhead and floor level
machines are aware of the aerial work platform’s presence.
Disconnect power to overhead cranes. Barricade floor area
if necessary.
•
Do not operate over ground personnel. Warn personnel not
to work, stand, or walk under a raised platform. Position
barricades on floor as necessary.
