SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3-16
– JLG Lift –
3121272
3.8
PLATFORM EXTENSION
This machine is equipped with an extension deck, giving the
operator better access to certain work areas. The deck extension
adds length to the front of the platform.
FOR MAXIMUM CAPACITY OF THE DECK EXTENSION SEE SECTION 5, TABLE 5-
2 OR REFER TO THE CAPACITY PLACARD ON THE PLATFORM BILLBOARD.
DO NOT “LOWER” WITHOUT COMPLETELY RETRACTING THE PLATFORM
EXTENSION.
To extend the deck:
1.
Pull up on the
locking pin (1)
on left side mid-rail near
the front of the machine. Rotate pin 90° to hold in up
position.
2.
Grasp the
top handrails (2)
of the extendible deck
and push the extension out until it hits the stops.
3.
Re-engage the
locking pin (1)
and move platform
extension in or out until the locking pin engages.
To retract the deck:
1.
Pull up on the mid-rail
locking pin (1)
and turn the pin
90° to hold in up position.
2.
Pull the extension deck all the way back into the main
deck using the
top handrail (2)
.
3.
Re-engage the mid-rail
locking pin (1)
back to the
locked position and engage the hole in the mid-rail.
Figure 3-9. Platform Deck Extension
1
2
