JLG 1932E2 Operator'S And Safety Manual Download Page 5 | Manualshive

Page: 5 / 48

background image

FOREWORD

3120854

– JLG Lift –

c

FOR :

•Accident Reporting

•Product Safety Publications

•Current Owner Updates

•Questions Regarding Product Safety

•Standards and Regulations Compliance Information

•Questions Regarding Special Product Applications

•Questions Regarding Product Modifications

CONTACT :

Product Safety and Reliability Department
JLG Industries, Inc.
1 JLG Drive
McConnellsburg, PA 17233

In USA:

Toll Free: 877-JLG-SAFE

877-554-7233

Outside USA:

717-485-5161

E-mail: [email protected]

THIS PRODUCT MUST COMPLY WITH ALL SAFETY RELATED BULLETINS. CONTACT JLG INDUSTRIES, INC. OR THE LOCAL AUTHO-
RIZED JLG REPRESENTATIVE FOR INFORMATION REGARDING SAFETY-RELATED BULLETINS WHICH MAY HAVE BEEN ISSUED FOR
THIS PRODUCT.

MODIFICATION OR ALTERATION OF AN AERIAL WORK PLATFORM SHALL BE MADE ONLY WITH WRITTEN PERMISSION FROM THE
MANUFACTURER

JLG INDUSTRIES, INC. SENDS SAFETY RELATED BULLETINS TO THE OWNER OF RECORD OF THIS MACHINE. CONTACT JLG INDUS-
TRIES, INC. TO ENSURE THAT THE CURRENT OWNER RECORDS ARE UPDATED AND ACCURATE.

JLG INDUSTRIES, INC. MUST BE NOTIFIED IMMEDIATELY IN ALL INSTANCES WHERE JLG PRODUCTS HAVE BEEN INVOLVED IN AN
ACCIDENT INVOLVING BODILY INJURY OR DEATH OF PERSONNEL OR WHEN SUBSTANTIAL DAMAGE HAS OCCURRED TO PERSONAL

IMPORTANT

IMPORTANT

«
...
3
4
5
6
7
...
»

Summary of Contents for 1932E2

















































Reviews:

No comments

Related manuals for 1932E2

Brand: Campbell Pages: 72

Brand: ICP DAS USA Pages: 4

Brand: Panamax Pages: 16

Brand: Ravaglioli Pages: 90

Brand: R-Tech Pages: 57

Brand: M-system Pages: 7

Brand: Omniflex Pages: 2

Brand: hotset Pages: 2

Brand: PROCRAFT Pages: 25

PYTHON-PLUS K2447-1

Brand: Lincoln Electric Pages: 39

Brand: Mackworth Pages: 7

Brand: MOSA Weld Pages: 36

Brand: Ergoswiss Pages: 27

TECNICAPLASMA18-31

Brand: Telwin Pages: 20

Brand: Vaillant Pages: 56

Brand: ICP DAS USA Pages: 93

Brand: Carel Pages: 94

Digi-Tig250ACDC

Brand: CARBONE Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands