background image

2

JLA Limited

113375 - 16

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas.  These
instructions must be posted in a prominent location near the dryer.

FOR YOUR SAFETY

Do not store or use gasoline
or other flammable vapors
and liquids in the vicinity of
this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful.  The
manufacturer reserves the right to make changes from time to time, without notice or obligation, in
prices, specifications, colors, and material, and to change or discontinue models.  The illustrations included
in this manual may not depict your particular dryer exactly.

IMPORTANT

For your convenience, log the following information:

DATE OF PURCHASE ________________________________________________________ MODEL NO. _____________

DISTRIBUTOR’S NAME _______________________________________________________________________________

SERIAL NUMBER(S) __________________________________________________________________________________

___________________________________________________________________________________________________

___________________________________________________________________________________________________

Replacement parts can be obtained from your distributor or JLA.  When ordering replacement parts from JLA, you
can FAX your order to JLA at 01422 824390 or telephone your order directly to the JLA Parts Department at 01422
822282.  Please specify the dryer model number and serial number in addition to the description and part number,
so that your order is processed accurately and promptly.

These instructions are only valid if the following country code is on the appliance… If this code is not present on the
appliance, it is necessary to refer to the technical instructions which will provide the necessary information concerning
the modification of the appliance to the condition of use for the country.

In accordance with EN ISO 3166-1, the names of countries shall be represented by the following codes:

GB

United Kingdom

IE

Ireland

D120

Retain This Manual in a Safe Place for Future Reference

This product embodies advanced concepts in engineering, design, and safety.  If this product is properly
maintained, it will provide many years of safe, efficient, and trouble free operation.

Only qualified technicians should service this equipment

.

OBSERVE ALL SAFETY PRECAUTIONS

 displayed on the equipment or specified in the installation

manual included with the dryer.

The following “

FOR YOUR SAFETY

” caution must be posted near the dryer in a prominent location.

Summary of Contents for D120

























Reviews: