background image

SB-H-XTOUR/10W3v3  INSTR_SKU# 011336

Page 7 • JL Audio, Inc., 2012

I N C L U D E D   H A R D W A R E

 

(2) 3/8 - 16 x 2-1/4” Set Screw      (2) U-Nut                           (1) MDF Spacer
(2) 3/8 Flat Washer                       (2) 3/8” Hex Nut

(2) 3/8” Split Lock Washer            (2) Aluminum Spacer

S P E C I F I C A T I O N S

 

Enclosure Type:

  Acoustic Suspension (sealed)

Driver Type:

  10W3v3-2

Nominal Impedance: 

 2 ohm

Continuous Power Handling:

  500 watts

P O W E R   R E C O M M E N D A T I O N

 

 JL Audio recommends high quality amplifiers such as the JL Audio XD700/5 or XD300/1.  The diagram below 

shows the recommended crossover settings for the XD300/1.  If another amplifier is being used, please

refence this illustration and use similar settings on that amplifier.

All JL Audio amplifiers are very versatile audio components.  Please consult the owner’s manual for even more 

detailed information about installing and tuning your amplifier.

C O N N E C T I O N S

 

Using quality power, signal and speaker wire is essential in ensuring the performance of your Stealthbox®.   

JL Audio recommends  using a 4 AWG power kit such as the XD-PCS4-1B for your Stealthbox® amplifier.  Other 

kits are available should you be using more than one amplifier.  Signal wire such as the JL Audio Premium 

Audio Interconnect Cables should be used that will provide signal for both channels of the amplifier.  JL Audio 

reccommends using 12AWG speaker wire for subwoofers such as our XC-BCS12-25.

M I D / H I G H   F R E Q U E N C Y   D R I V E R   F I T M E N T

A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.

Front Speaker Size / Location:  6-1/2”- Front Doors

Fits JL Audio Models: TR650-CXi, TR650-CSi, C2-650x, C2-650, C3-650,

                                              C5-650x, C5-650, & ZR650-CSi

Rear Speaker Size / Location:  6-1/2”- Rear Door 

Fits JL Audio Models:  TR650-CXi, TR650-CSi, C2-650x, C2-650, C3-650,

                                              C5-650x, C5-650, & ZR650-CSi

 

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered 

trademarks of JL Audio, Inc.,. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.,. 

JLA-SKU#  94543  01.19.2012  •  Printed in USA  •  ©2011 JL Audio, Inc.,.  •  U.S. PATENTS:  #5,734,734  #5,949,898  #6,118,884  #6,229,902  #6,243,479  

#6,294,959  #6,501,844  #6,496,590  #6,441,685  #5,687,247  #6,219,431  #6,625,292  #D472,891  #D480,709  Other U.S. & Foreign patents pending. 

For more detailed information please visit us online at

 www.jlaudio.com.

(954) 443-1100

w w w. j l a u d i o . c o m

1 0 3 6 9   N O R T H   C O M M E R C E   P A R K W A Y     •     M I R A M A R ,   F L O R I D A     •     3 3 0 2 5     •     U S A

S T E P   4 5

Reinstall the storage pocket, shifter trim, and woodgrain trim 
pieces.

S T E P   4 4

Remove the radio and unplug the 16 pin plug as shown.  
Reinstall the radio.

C O N G R A T U L A T I O N S !

You have completed the installation for this model!

Enjoy your new Stealthbox®!

Please refer to the Power Recommendation section for 

an amplifier recommendation and basic set-up help.

Summary of Contents for Stealthbox SB-H-XTOUR/10W3v3








Reviews: