Continued on Next Page
SB-H-XTOUR/10W3v3 INSTR_SKU# 011336
Page 3 • JL Audio, Inc., 2012
S T E P 1 5
Pictured is the rear seat area with the seat cushion removed.
S T E P 1 9
Unclip the screw cover behind the seat release handle and
remove the two screws.
S T E P 1 4
Pull out on the release tabs from under the front of the seat
cushion, and remove the cushion.
S T E P 1 8
Remove the upper trim panel by sliding it toward the center
of the vehicle.
S T E P 1 3
Fold the seat backs down slightly to access the bolts holding
in the seat cushion. Remove the two bolts.
S T E P 1 7
Unclip and remove the passenger side seat bolster.
S T E P 1 2
Open the rear doors to begin removing the rear seat cushion.
S T E P 1 6
Remove the screw holding in the base of the passenger side
seat bolster.
