background image

I N S T A L L A T I O N   G U I D E

for the

SB-F-SUPRCNSL/8W7

SB-F-SUPRCNSL/8W7

2008-Up Ford Super Duty Trucks

2008-Up Ford Super Duty Trucks

with front bucket seating

with front bucket seating

Thank you for choosing a JL Audio Stealthbox

®

 for your automotive sound system. With proper 

installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox

®

 installed by your authorized JL Audio 

dealer. The installation professionals employed by your dealer have the necessary tools and experience 

to disassemble and reassemble your vehicle properly.  Also, keep in mind that your warranty coverage 

extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you 

prefer to perform your own installation, please read this installation guide completely 

before beginning the process.

 

If you choose to perform the installation yourself, it is absolutely vital that 
the Stealthbox

®

 be properly mounted to the vehicle according to these 

instructions.  Failure to mount the enclosure properly presents two problems:  

1) The sub-bass performance will suffer due to the movement of the enclosure 
caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision 
or sudden deceleration.

S T E P   1

Remove all contents from the center console.

Remove the center console from the truck. 

Keep the mounting bolts that secure the console to the 
floor. These are to be reused in future steps. 

Continued on Next Page 

S T E P   2

Remove the lid. 

 

S T E P   3

Remove the front panel / cup holders

SB-F-SUPRCNSL2/8W7_INSTR_SKU#011249

SB-F-SUPRCNSL2/8W7_INSTR_SKU#011249

INSTALLATION 
D I F F I C U L T Y :

4

5

OUT 
OF

ESTIMATED TIME:
      2-3 HOURS

 2-3 HOURS

Summary of Contents for Stealthbox SB-F-SUPRCNSL/8W7







Reviews: