3
Product Description
The MLC-RW is an advanced controller
designed for managing RGB LED lighting circuits.
Outfitted with PWM technology and high-
capacity circuitry, the MLC-RW produces up to
30 amps (400 watts) of continuous output to
power modern, multi-LED networks.
All LED functions are easily controlled
with the included rotary encoder or using your
handheld device via built-in WiFi connection.
Note: Wireless functionality requires your
compatible iOS® or Android® device and the
LiteWave ITI app (see WiFi Functionality section
for more info).
The MLC-RW also includes a suite of onboard
safety features, including automatic over-current
and short-circuit protection, as well as voltage and
temperature monitoring.
What Is Included
(1) MLC-RW Control Module
(1) Rotary Encoder
(2) #8 x 1-1/2-inch Phillips-head stainless-steel
screws for control module mounting
(2) #8 x 1/2-inch Phillips-head stainless-steel
screws for rotary encoder mounting
(1) Owner’s manual
WiFi Functionality
The MLC-RW is outfitted with built-in WiFi
network capabilities enabling wireless control
using your compatible iOS® or Android® device
running the LiteWave ITI app. (Note: LiteWave
ITI is a third party app available for download
on the App Store and Google Play.) Refer to the
instructions below to connect the MLC-RW with
the LiteWave ITI app.
1. Download the LiteWave ITI app from the
App Store or Google Play.
2. Make sure that the MLC-RW is connected
and powered on.
3. In your device’s WiFi settings, connect your
device to the “LiteWave_xxxx” network
name. (The default password is:
password
)
4. Launch the app on your device. When
prompted, update your password and install
new firmware, if available.
Control Module Placement & Connection
While the MLC-RW control module can
be mounted in any orientation, its installation
location and distance should be considered
when selecting a mounting position for the rotary
encoder and making connections. Use the two
#8 x 1-1/2-inch phillips-head stainless-steel screws
to mount the control module to a flat surface.
Refer to the table below for wire connection info.
Wire Color
Connection
Po
w
er
Yellow
+12VDC (Install a fuse at this connection
point that is appropriate for the total
current draw of all LED circuits.)
Black
GROUND
Ill
um
ina
tion
Red
Red RGB LED Negative (–)
Green
Green RGB LED Negative (–)
Blue
Blue RGB LED Negative (–)
White
Main RGB LED Positive (+12V)
Rotary Encoder Installation
The rotary encoder uses a threaded-collar
mounting design that can accommodate
installations in flat panels up to 0.625 inches
(16 mm) thick. An adaptor bracket is also included
to accommodate under dashboard installations.
Refer to the diagrams on page 2 for your specific
mounting application.
Rotary Encoder Functions
The knob of the rotary encoder is used to
activate and control all functions of the MLC-RW.
Located in the center of the knob is an LED that
will display corresponding changes in color and
brightness of the output. Refer to the table below
for operation and control mode info.
Command
Function/Mode
Press & Hold
for 2 seconds
Power ON
Press & Hold
for 5 seconds
Power OFF
Press & Hold
for 10 seconds
WiFi Reset: Restores wifi “password”
Press once to
advance
through
each Mode
Color Spectrum
(default): Rotate to scroll colors
Brightness
: Rotate to adjust LED intensity
Color Cycle
: Rotate to adjust color change rate
Specifications
Operating Voltage 10 - 17.6V DC
Operating Temperature -4 F to +167 F (-20 C to +75 C)
Output Capacity 30 A (continuous)
Auto Protection Modes Over-Current, Short-Circuit
Monitoring Modes Voltage, Temperature
WiFi Band Compatibility B, G, N
