Compress the base and two upper halves of the fixture
together while pushing the fork out through the small
pin holes on the opposite side. Flip the fork, and
reinstall, along with the two #8 - 32 x 3/8” machine
screws and lock washers.
3
In applications that require the logo to be inverted,
remove the two #8 -32 x 3/8” machine screws and lock
washers.
2
Determine the speaker mounting location, and
temporarily secure the fixture around the pipe by hand
tightening the four 1/4 - 20 x 1-1/4” machine screws and
1/4” lock washers.
4
Be sure the indicated stopping points are on opposite
sides of the fixture as shown. The enclosure can rotate
up to 205.5 degrees in the clockwise direction, and 128.5
degrees in the counter-clockwise direction.
1
128.5
205.5
