Rotate the speaker to the desired angle. Reinstall the
#8 x 1-1/4" Pan Head Screws and #8 Flat Washers.
For best adhesion, it is recommended to clean the
inside of the aluminum cap with acetone (not
included) prior to attaching it to the enclosure. Apply
a circular bead of Silicone Adhesive to the inside of
the aluminum logo cap, about 1/2-inch (13 mm)
from the outer edge.
Align the aluminum logo cap to the desired angle of
rotation, and press it onto the back of the enclosure.
Apply masking tape (not included) to hold the cap in
place until the silicone cures (at least 24 hours).
12
13
14