Slide the excess cable into the opening in the pipe as
you raise the enclosure to flush the Lower Fixture to
the pipe.
Align the two halves of the fixture around the pipe.
Install (2) 1/4" Split Lock Washers and (2) 1/4 - 20 x
1-1/4" Machine Screws as pictured, and hand tighten
them into the fixture. DO NOT FULLY TIGHTEN AT
THIS TIME.
Adjust the yaw angle of the enclosure and fixture
assembly to the desired position.
Remove one of the 1/4 - 20 x 1-1/4" Machine Screws
at a time. Apply Loctite® Red Thread-Locking
Compound to the screw end, reinstall, and fully
tighten. Repeat the process for the other three
screws.
Remove adhesive backing and install the JL Audio
logo badge
(Sport Grille Models Only)
.
If a different speaker angle is desired, remove the #8
x 1-1/4" Pan Head Screws and #8 Flat Washers
securing the speaker in the enclosure.
8
9
10
11
6
7