PAGE 28 of 35
Chapter 7
MAINTENANCE
7.1. Maintenance Schedule
The Camera must be maintained according to the following
schedule:
Task
Frequency
Inspect cables and connectors
Inspect the cables for damage. Have any
damaged cable repaired by a qualified
person or replace the cable assembly as
necessary.
►
Inspect all connectors for damage or
moisture. Straighten bent pins. Dry
connectors before using.
Every use
General cleaning
Ensure that the Camera stays relatively
clean by wiping off any excess dirt or other
contaminants after every use.
Every use
7.2. Cleaning
General cleaning of components is important to keep your
system working well. All components that have no wiring
or cables are waterproof. Components can be washed with
warm water, dish soap and a medium bristle brush.
Before using the scanner, ensure all connectors are free of
water and moisture.
Inspect cables / connectors daily and as required, depending
on occurrence of damaging events.
NOTE:
All components with wiring, cables or electrical
connections are splash proof. However, these
components are
NOT
submersible.
NOTE:
Never use strong solvents or abrasive materials to
clean your scanner components.
