PAGE 19 of 35
DW0014 Rev 00.1
5.4. Connecting Camera Cable
1.
Connect the
camera cable
to the left side
receptacle
(Fig. 22)
.
2.
Ensure NAVIC
system power
is off.
3.
Connect the camera cable’s power to the crawler’s
auxiliary connector located on the umbilical
(Fig. 23)
.
WARNING!
DO NOT DISCONNECT UNDER
LOAD
. Shut off power before connecting or
disconnecting the RECON. Permanent damage to
electronics could occur.
Fig. 22
- Connect camera cable to the camera
Fig. 23
- Connect camera power to umbilical
