13/39
5. [Setup] Function setting
In this chapter, you will learn all the settings:
●< settings display > page
●Temperature correction
●Temperature reset
5.1 < settings display > page
At any time, you can enter the <Setup Display> page by pressing the [Setup] shortcut.
The <Setup Display> page allows you to complete all measurement-related settings, but
the instrument does not display measurement results and sorting results, and the
instrument is in a wait state. These settings include the following parameters:
Comparison - comparator function settings
Speed -acquisition speed setting
Alarm – Buzzer settings
baud rate-baud rate setting
Unit -temperature unit settings
Figure 5- 1< Settings Display > page
5.1.1 Set [comparator]
The comparator settings include: turn on and off.
Setting comparator steps
First steps
Press the [settings] button to enter < function Settings > main page.
Second steps
Use cursor keys to select [comparison] fields;
Third steps
Press [ENTER] key to open option, function key selection
Function keys
Function
OFF
Turn off the comparator function and the icon COMP
disappears
ON
Turn on comparator function and icon COMP display
If you open the option, you do not need to choose. Press the [ESC] key to cancel the