12/20
6. Automatic screen switching
:
ON/OFF Switch.
7.Time settings: set the year, month, hour, minute and seconds that you need to display.
8. Buzzer alarm: when the temperature is adjusted to "ON", if the temperature exceeds the upper
limit or lower limit set by you, there is a sound of sound. If it is adjusted to "OFF", there is no
sound hint.
9. In the measurement, you can set an upper limit of temperature and a lower limit of a
temperature. When the measured temperature exceeds the range you set, if the buzzer alarm is
in the "ON" state, there will be a sound warning to you. The "+" on the display represents the
positive temperature "-" representing the negative temperature.
10. Type of thermocouple: it can be arranged from 8 to one, and different thermocouple types
are set for a unit.
11. After all settings are finished, press "set up" to exit the parameter settings.
Curve parameter page introduction:
At any interface, just press the "DISP" button to return to the measurement display interface.
According to the "graph" key, the curve display interface is displayed, as shown in the figure.
According to the "curve setting" key, enter the "curve setting" display interface, as shown in the
figure.
Summary of Contents for JK4000 Series
Page 1: ......