ACGRID
L
L
E PS OUTPUT
N
N
E
E
Sensor
L
L
N
N
E
E
Battery
L
N
PE
PV
E PS
Step 3: Push the threaded sleeve into the socket, Tighten up the cap on the terminal.
Chart 5.13
Step 4: Finally, Push or screw the threaded sleeve to connection terminal until both are
locked tightly on the inverter.
Chart 5.14
Step5: To remove the AC connector, press the bayonet out of the slot with a small
screwdriver and pull it out, or unscrew the threaded sleeve, then pull it out.
Chart 5.15
The recommended wiring diagram is as follows:
Chart 5.16
23
24
Click!
The Inverter Side
The Inverter Side
Lock the housing
The Inverter Side
The Inverter Side
The Inverter Side
Unlock the housing
Lock the housing
Lock the housing
Unlock the housing
Inverter
