F350,F650
Laminator manual
-14-
6.4、Wrinkles adjustment：
If there is any wrinkles, Anticlockwise loose the intension adjustment
key, and clockwise to adjust it till no wrinkles. If single laminating
，
We
just adjust the up glued film to solve this problem
；
In order to less
wrinkles, Up stretching at the film’s exit.
6.5、To clean the jammed film
When the roll is heating
，
printed matter or glued film stick on the
surface of roll, cyclic rotation maybe caused the roll is damaged and
the machine is broken, don’t use any clear liquid or solvent, which in
order to rolls are burned.
Using the following solution to clean it
：
6.51
、
Stopping the machine and speed to slowest
，
Cut the involved printed
matter or glued paper
，
start
“
reverse key
”，
Take out the involved
printed matter or glued film from front .
6.52
、
Put the up roll to highest position
，
take away the safety cover and
working table
；
6.53
、
Setting the temp. 80
－
90
℃；
6.54
、
press on
“
reverse key
”
，
Using a soft cloth to clean the up and down
heating rolls which till the surface of the rolls are clean.
6.55
、
Install the working table and safety cover
；
6.56
、
Re-stall the film
；
Note
：
when clean the roll
，
don’t touch any metal or something hard parts, in
order to hurt the surface of the roll
，
when clean, we need to positive
operation and machine inversion, in order to cloth or hand get into
the roll.
7、Laminator Techniques and skill
7.1
、
To do the perfect laminating image
，
there are some important characters :
temperature ,tension regulate and detection time of glued film on
heating rolls. So
，
see the printed matte detail, choose the suitable film,
temperature ,speed and tension
。
In general, More thickness film or
printed matte, we need more slow speed and more higher temperature
，
because we need more melt time for the thickness film
；
otherwise
，
thin
film or printed matte, will be more faster speed and low temperature.
