F350,F650
Laminator manual
-13-
6.24
、
when catch the setting temperature
，
Put the up film on heating roll,
（
see
pic.3
）
Put the guide paper up and stick on the glued film, and put the
down film also stick on
，
put on safety cover
，
install the working table
，
adjust the suitable position , Locking paper positioning side regulation ,
put roll space adjustment lever on and corresponding the scale of glued
film
；
6.3、Laminating
6.31
、
manual mode
：
Press
“
start
”
，
The paper is running from front to back side, And left it
from heating roll to hauling roll
，
press again
“
start
”，
motor is stopping.
Using the horizontal blade to cutting, Finally, a paper is finishing
laminating
。
6.32
、
Automatic mode
：
Press
“
start
”，
the start key is lighting
，
Put the paper to working table
，
the motor will automatic run after 2 sec
，
paper is running from front
to back side and via heating roll. The motor is stopping when the
back of paper leave the cover sensor, Using the horizontal blade to
cutting,Finally, a paper is finishing laminating. Re-put paper on
should do automatic re-work
。
