Jimmy JF41, Instruction Manual

Page: 10 / 24

8
In addition to maintenance, please do not decompose or modify the product, which may cause
fire, electric shock or injury.
Do not let this product fall from the height or hit the product hard, otherwise it may lead to failure
or damage.
Do not expose in front the fan when it works for a long time, too cold may affect the health.
Before assembling and disassembling the machine, be sure to pull out the power plug.
If you do not use the machine for a long time, please turn off the power switch, unplug the power
plug, and place it in a dry place for proper storage.
When not in use, turn off the power and unplug the power plug to avoid circuit failure.
Trouble shooting
Please check the following points before entrusting the maintenance department.
Symptoms Possible Causes Solutions
Press the " "
button and the fan
won't work
Adapter not properly plugged
into socket Plug the adapter into the socket
correctly
Adapter power cord plug not
securely plugged into host
interface
The adapter will make a sound when
it is properly connected to the host
Fan running noise
is too high
The fan blade knob is loose Tighten the fan knob
Fan head and front cover are
not installed correctly
Firmly install fan head and front cover
The fan runs but
the wind is weaker
Check the fan mode settings
It is normal for the wind force of this
product to change under the mode
other than constant wind mode
The fan blades and the front &
rear cover are coated with dust
Dust will reduce the efficiency of the
wind supply, regular maintenance is
recommended
The fan stops
automatically The timer was set and time is
up
Please reset the timer
Unable to operate
remote controller
Aging of remote controller
battery
Replace the battery
The battery positive and
negative poles of the remote
controller are wrongly placed
Confirm battery positive and
negative electrode
distance exceeds maximum
remote controller distance Must be in the range of remote
controller
The remote controller is
wrongly matched Refer to "use of remote controller"
for matching